MAKO Robotic Joint Replacement Surgery in Illinois

Home 5 Our Services 5 Mako Robotic – Arm Assisted Surgery
Suburban Orthopaedics is proud to be among the first in our area to offer this innovative joint replacement technology. The Mako System is the first and only robotic technology that can be used across the joint replacement service line to perform total knee, total hip, and partial knee replacements. Suburban Orthopaedics’ Dr. Howard FreedbergDr. Ankur Chhadia, and Dr. Samuel Lake are certified in Mako Robotic-Arm Assisted Surgery.

Benefits of Mako Robotic-Arm Assisted Surgery:

  • 3D modeling of the patient’s own bone anatomy
  • Personalized surgical plan
  • Custom implant sizes

What is the Mako System?

Through CT-based 3D modeling of bone anatomy, our surgeons can use the Mako System to create a personalized surgical plan and identify the implant size, orientation, and alignment based on each patient’s unique diagnosis and anatomy. The Mako System also enables surgeons to virtually modify the surgical plan intra-operatively and assists the surgeon in executing bone resections.

Mako Robotics for Hip and Knee Replacement

Each patient is unique and can experience joint pain for different reasons. It’s important to talk to us about the reason for your hip and knee pain so you can understand the treatment options available to you. Pain from arthritis and joint degeneration can be constant or come and go, occur with movement or after a period of rest, or be located in one spot or many parts of the body. It is common for patients to try medication and other conservative treatments to treat their hip and knee pain. If you haven’t experienced adequate relief with those treatment options, you may be a candidate for Mako Total Hip and Knee replacement, which may provide you with relief from your hip and knee pain.

Mako Total Hip Replacement Testimonial

Total Hip Replacement

Mako is an innovative solution for many suffering from painful arthritis of the hip.

Scan. It all starts with a CT scan so your surgeon can know more about your anatomy.

Plan. The CT scan is used to create a 3D CT-based model of your hip. Your surgeon uses this 3D model to create a personalized surgical plan and assist your surgeon in performing your hip replacement procedure.

Mako Can. In the operating room, your surgeon follows your personalized surgical plan while preparing the bone for the implant. The surgeon guides Mako’s robotic arm within the predefined area, and Mako’s AccuStopTM technology helps the surgeon stay within the planned boundaries that were defined when the personalized preoperative plan was created.

It’s important to understand that the surgery is performed by an orthopaedic surgeon, who guides Mako’s robotic arm during the surgery to position the implant in the knee and hip joints. Mako does not perform surgery, make decisions on its own or move without the surgeon guiding it. Mako also allows your surgeon to make adjustments to your plan during surgery as needed.

Mako for Total Hip replacement is a surgical procedure intended for patients who suffer from noninflammatory or inflammatory degenerative joint disease (DJD). Some forms of DJD include osteoarthritis (OA), post-traumatic arthritis, rheumatoid arthritis (RA), avascular necrosis (AVN) and hip dysplasia.

Stryker Corporation or its other divisions or other corporate affiliated entities own, use or have applied for the following trademarks or service marks: AccuStop, Mako, Stryker. All other trademarks are trademarks of their respective owners.

Mako Total Knee Replacement Testimonial

Total Knee Replacement

Mako is an innovative solution for many suffering from painful arthritis of the knee.

Scan. It all starts with a CT scan so your surgeon can know more about your anatomy.

Plan. The CT scan is used to create a 3D CT-based model of your knee. Your surgeon uses this 3D model to create a personalized surgical plan and assist your surgeon in performing your knee replacement procedure.

Mako Can. In the operating room, your surgeon follows your personalized surgical plan while preparing the bone for the implant. The surgeon guides Mako’s robotic arm within the predefined area, and Mako’s AccuStopTM technology helps the surgeon stay within the planned boundaries that were defined in the personalized surgical plan to prepare the bone for the Triathlon Total Knee implant. With over a decade of clinical history, Triathlon knee implants are different from traditional knee replacement implants because they are designed to work with the body to promote natural-like circular motion.2-5

It’s important to understand that the surgery is performed by an orthopaedic surgeon, who guides Mako’s robotic arm during the surgery to position the implant in the knee joint. Mako does not perform surgery, make decisions on its own or move without the surgeon guiding it. Mako also allows your surgeon to make adjustments to your plan during surgery as needed.

Stryker Corporation or its other divisions or other corporate affiliated entities own, use or have applied for the following trademarks or service marks: AccuStop, Mako, Stryker, Triathlon. All other trademarks are trademarks of their respective owners.


References

  1. B. Kayani, S. Konan, J. Tahmassebi, J. R. T. Pietrzak, F. S. Haddad Robotic-arm assisted total knee arthroplasty is associated with improved early functional recovery and reduced time to hospital discharge compared with conventional jig-based total knee arthroplasty: A PROSPECTIVE COHORT STUDY Bone and Joint Journal: 2018; 100-B:930–7.
  2. Mistry JB, Elmallah RK, Chughtai M, Oktem M, Harwin SF, Mont MA. Long-term survivorship and clinical outcomes of a single radius total knee arthroplasty. Surg Technol Int. 2016;28:247-251.
  3. Piazza S. Designed to maintain collateral ligament stability throughout the range of motion. Stryker-Initiated Dynamic Computer Simulations of Passive ROM and Oxford Rig Test. 2003.
  4. Wang H, Simpson KJ, Ferrara MS, Chamnongkich S, Kinsey T, Mahoney OM. Biomechanical differences exhibited during sit-to-stand between total knee arthroplasty designs of varying radii. J Arthroplasty. 2006;21(8):1193-1199. doi:10.1016/j.arth.2006.02.172
  5.  

  6. Gómez-Barrena E, Fernandez-García C, Fernandez-Bravo A, Cutillas-Ruiz R, Bermejo-Fernandez G. Functional performance with a single-radius femoral design total knee arthroplasty. Clin Orthop Relat Res. 2010;468(5):1214-1220. doi:10.1007/s11999-009-1190-2

Partial Knee Replacement

Mako is an innovative solution for many suffering from painful arthritis of the knee.

Scan. It all starts with a CT scan so your surgeon can know more about your anatomy.

Plan. The CT scan is used to create a 3D CT-based model of your knee. Your surgeon uses this 3D model to create a personalized surgical plan and assist your surgeon in performing your knee replacement procedure.

Mako Can. In the operating room, your surgeon follows your personalized surgical plan while preparing the bone for the implant. The surgeon guides Mako’s robotic arm within the predefined area, and Mako’s AccuStopTM technology helps the surgeon stay within the planned boundaries that were defined when the personalized preoperative plan was created.

It’s important to understand that the surgery is performed by an orthopaedic surgeon, who guides Mako’s robotic arm during the surgery to position the implant in the knee joint. Mako does not perform surgery, make decisions on its own or move without the surgeon guiding it. Mako also allows your surgeon to make adjustments to your plan during surgery as needed.

Mako for Partial Knee replacement is a treatment option for adults living with early to mid stage osteoarthritis (OA) that has not yet progressed to all three compartments of the knee. Depending on where the arthritis affects the knee, patients may have an implant inserted in any of the following areas:

Stryker Corporation or its other divisions or other corporate affiliated entities own, use or have applied for the following trademarks or service marks: AccuStop, Mako, Stryker, Triathlon. All other trademarks are trademarks of their respective owners.


References

  1. Kayani B, Konan S, Tahmassebi J, Rowan F, Haddad F. An assessment of early functional rehabilitation and hospital discharge in conventional versus robotic-arm assisted unicompartmental knee arthroplasty: A PROSPECTIVE COHORT STUDY Bone Joint J 2019;101-B:24–33

Request an Appointment

At Suburban Orthopaedics, our providers are here to help you. Set up an appointment today.